top of page

Kitchen Cabinets

The kitchen is the heart of the home and must be comfortable, practical, and an outlet for creation and quality. You can design your own kitchen with the design and layout you want. Follow the steps below if you don't know where to start and that should get you going.
​

STEP 1

Measuring

STEP 2

Planning

STEP 3

Ordering

STEP 4

Installing

Measuring

Measuring is very important. Detailed and accurate measurements will ensure a good start and less errors. 

 

Measurements to make:

  • The height from the floor to the ceiling

  • Room measurement, length and width of the room, wall to wall

  • Measure each window and their distances from the floor and the corners of your room. Do the same for the door(s)

  • Location of any pipes, vents and electrical outlets

Planning

This part is the difference between a kitchen that works and one that doesn’t. There are lots of things to consider, like where to put the fridge, how you want your cabinets arranged and how many drawers you’ll need.

 

Remember the triangle rule for kitchens - the space between the sink, fridge and oven/hob. These are the areas you will be using most.

 

Ordering

When you plan is all set and done, you can now start ordering the components you need. Drop by to our store or order it online.

 

Materials available:

​

MFC Carcasses

​

Create your kitchen with quality materials. Nanoosi kitchen carcasses are made from high quality moisture resistant 16mm MFC with a white Melamine face finish.

​

Thermoformed Doors

​

Our doors and end panels are constructed from 18mm MDF with a vinyl coating heat wrapped around the face of the doors and panels, to allow a seamless wrapped finish.

Benchtops

Benchtops: We provide benchtops in the following variety:

  • Formica

  • Laminex

  • Artificial stone (Engineered stone)

  • Quartz stone

 

In Various colors. 

Installing

Assembly: The prices above are for flatpack kitchens, they are not assembled. We provide assembly for all the units and fitting/installation at an extra cost.

 

Measurements on-site and drawings: Measurements and drawings can be also provided.

 

Please contact us if you have any queries.

Remember to leave clearances for the appliances, refer to the manufacturer of your product for more details.

bottom of page